Description
The Glacier Hanging Down Light works with MR16 lamps or MR16 Chameleon lamps. It features a frosted shade perfect for projecting soft RGBW light.
Fixture Finish Maintenance
The Glacier fixture is available in the following finishes with a frosted acrylic shade: machined copper, brass, or blackened brass. These metals offer a beautiful living finish that weathers over time to a unique patina. If you prefer to maintain the original finish, we recommend wiping down the fixture periodically with a light oil, such as WD-40.
| GLACIER HANGING DOWN LIGHT | |
|---|---|
| Use | Downlighting Techniques in Trees or Architecture by Hanging on a Chain or Cable |
| Includes | LightingShrink Professional Crimp and Heat Shrink Cable Connector
Includes Chameleon MR16 When Purchased with a Lamp |
| Lamp | MR16 or Chameleon MR16 for RGBW Applications |
| Finish | Brass, Copper, or Blackened Brass |
INSTALLATION
INSTALLING THE FIXTURE
-
Unscrew the fixture body from the base.
-
Remove the stainless-steel snap ring from the lamp holder.
-
Install the lamp in the socket
-
Lay the front of the lamp inside the brass lamp holder and install the snap ring on the back-side lip of the MR16 lamp
-
Install the snap ring
-
Reinstall the lamp holder into the fixture body.
HANGING THE FIXTURE
IMPORTANT: DO NOT INSTALL ON OR NEAR ANY HIGH VOLTAGE POWER LINES
-
Hang the fixture from a secure stainless steel eye bolt, with or without a chain.
-
Create a drip loop with the wire by bending the wire to a slope one inch below the fixture cap
Reviews
There are no reviews yet.