Description
The Liberty Pump FL62A is an automatic submersible effluent sump pump with a 6/10 HP, 230V motor and a 10′ quick disconnect power cord. This sump/effluent pump is equipped with an adjustable, mercury-free switch that has a series (piggy-back) plug for manual bypass operation. The switch has a turn-on level of 12″ and turn-off level of 5″. The Liberty Pump FL62A automatic submersible sump/effluent pump is ideal for high-head applications and has a shut-off head of 63′.
Semi-open impellers, on the Liberty FL62A, permit the passage of 1/2″ solids without clogging. This effluent sump pump has a discharge of 1-1/2″FNPT.These effluent sump pumps are designed for STEP systems, liquid waste transfer and higher head de-watering applications.
Features:
- Semi-open impeller permits passageof solids without clogging
- Cast iron construction with all stainless and brass fasteners
- 416 stainless steel rotor shaft
- Oil-filled, hermetically sealed motors with thermal overload protection
- Permanently lubricated upper and lower ball bearings
- Unitized, carbon and ceramic shaft seal
- Single float, mercury-free level control with series plug for manual bypass operation – standard on automatic models
- Adjustable pumping range
- 1-1/2″ FNPT discharge
- Quick-disconnect 10′ standard power cord allows replacement of cord in seconds without breaking seals to motor
Technical Specifications:
- Horsepower: 6/10 HP
- Cord length: 10′
- Discharge: 1-1/2″ FNPT
- Solids Handling: up to 1/2″
- Shut-off Head: 63′
- Voltage: 208-230V
- Amps: 7
- Hertz: 60 Hz
- Phase: 1
- Maximum fluid temperature: 140°F
- Height: 13.75″
- Width: 10.25″
- Weight: 57 lbs.
- Minimum pit/basin diameter: 14″ in Sump and 18″ in Effluent applications
- Minimum pit/basin depth: 18″ in Sump and 24″ in Effluent applications
Warranty:
3 years manufacturer’s warranty
Reviews
There are no reviews yet.