Tekmar 161 Control – TekmarNet® 4 Setpoint – One Stage Heat

Description

Tekmar 161 Control – TekmarNet® 4 Setpoint – One Stage Heat

Features:

• Exercising
• Temperature sensor input
• Hot tub operation
• Scenes supported
• Floor operation
• Pulse width modulation
• DHW tank operation
• WWSD (if connected to tekmarNet^® network with outdoor sensor)
• tekmarNet^® 4 and tekmarNet ^® 2 compatible, on / off differential

Specifications:

• Agency Approvals – CSA C US, meets class B: ICES & FCC Part 15
• Ambient Conditions – Indoor use only, 32 to 122 degrees F (0 to 50 degrees C), RH less than or equal to 92 percent to 104 degrees F (40 degrees C), and 50 percent above 104 degrees F (40 degrees C), Altitude less than 9840 ft. (3000 m), Pollution Degree 2
• Control Type – Microprocessor control, this is not a safety (limit) control
• Dimensions – 2-7/8″ H x 2-7/8″ W x 13/16″ D (73 x 73 x 21 mm)
• Enclosure Material – White PVC plastic
• Enclosure NEMA Rating – NEMA 1
• Hydronic – HVAC Control Type – tekmarNet4 Setpoint Control
• Power Supply – 24 V (ac) plus / minus 10 percent, 50/60 Hz, 1.7 VA, NEC / CEC Class 2
• Relay – 24 V (ac) 2 A
• Sensor – NTC thermistor, 10 k ohms at 77 degrees F (25 degrees C plus / minus 0.2 degrees C) Beta=3892

Installation Manual